Adjusting The Horizontal Registration - Canon iR7086 Series Service Manual

Wl
0 0
2 2
4 4
6 6
8 8
10 10

2.2.22 Adjusting the Horizontal Registration

iR7095P
<Cassette 3/4>
1) Press the release button of cassette 3/4, and slide out the cassette.
2) Detach the cassette front cover [1] in the direction of the arrow.
- 2 screws [2]
3) Loosen the 2 fixing screws [1] found on the right/left of the cassette.
4) Move the cassette case [2] to the front or the rear to make adjustments.
- move it to the rear to decrease the horizontal registration (left margin).
- move it to the front to increase the horizontal registration (left margin).
[2]
[1]
5) Check to make sure that the horizontal registration (left margin) on prints
using cassette 3/4 as the source of paper is 2.5 +/-1.5 mm.
F-2-144
[2]
[1]
F-2-145
[2]
[1]
F-2-146
[1] Paper movement
6) When done, tighten the 2 fixing screws loosened in step 3).
7) Shift up the cassette front cover [1] in the direction of the arrow, and se-
cure it in place using 2 screws [2].
0012-2060
8) Put cassette 3/4 back inside the machine.
9) When done, execute the following service mode items:
Cassette 3
COPIER > FUNCTION > CST > C3-STMTR
COPIER > FUNCTION > CST > C3-A4R
Register the paper width basic value for cassette 3.
9-1) Place STMTR paper in the cassette 3, and move the side guide plate
to suit the STMTR width.
9-2) Select C3-STMTR in service mode to highlight, and press the OK
key so that adjustment will be executed and the value will be registered
automatically.
9-3) Likewise, repeat steps 9.1) and 9.2) for A4R.
Cassette 4
COPIER > FUNCTION > CST > C4-STMTR
COPIER > FUNCTION > CST > C4-A4R
Perform the work you performed for cassette 3.
10) Exit the service mode.
<Front Deck Left/Right>
1) Press the release button of the front deck (left/right), and slide out the
deck.
2) Loosen the 4 screws [1].
[1]
image
F-2-147
[2]
[1]
F-2-148
Chapter 2
2-35