2) Mount the facing plate [2] to the voice board [1] by 2 binding screws (M3X6) [3].
3) The slide switch SW1 found on the voice guidance board is set to 33 MHz at time of shipment; be sure to set it to 66 MHz for use on this machine.
[1]
[2]
F-2-275
[3]
[1]
F-2-276
66MHz
F-2-277
Checking the slide switch SW1 on the voice guidance board
The slide switch (SW1) on the Voice Guidance Board-A1 is provided as a
means of switching frequencies (33 MHz/66 MHz) to suit the transfer speed
of the PCI bus. It is important for the switch setting to suit the transfer speed
so that the voice will be free of interruption.
For the machine, 66MHz is the correct position of the switch.
[2]
[2]
[2]
[2]
Chapter 2
2-85