Canon iR7086 Series Service Manual page 715

Chapter 18
An old model has to be upgraded to the V50.00 system or later for an upgraded device.
See the following procedure to upgrade.
1) Before upgrade, backup the data if needed.
At upgrade, HDD must be all formatted; thus, user data saved in HDD will be initialized.
The data in additional function cannot be imported with the upgraded device; thus, backup is not needed.
Main data items which cannot be taken over after upgrade
<Common Settings>Stack Bypass Standard Settings
<Mail Box Settings>User Inboxes Settings
<Mail Box Settings>Standard Scan Settings
<Mail Box Settings>Confidential Fax Inboxes Settings
<Copy Settings>Standard Settings
<System Settings>Device Information Delivery Settings: Transmitting Settings
<System Settings>Device Information Delivery Settings: Receive Restriction for Each Function Ask user to reset
<COPY>Mode memory
<COPY>Recall
<BOX>BOX Scan mode memory
<BOX>BOX Print mode memory
<SEND>Recall
<SEND>Standard Send Settings
<Log>Send/Receive log
<Log>Copy log
<Log>Printer log
<Log>Network log
<Log>Job No.
<Device Information Delivery Settings>Destination registered at the destination settings
<Device Information Delivery Settings>Receive Restriction for Each Function
<Device Information Delivery Settings>Communication Log
Document data items in the box
User Inbox
Conf.Fax Inbox, Memory Rx Inbox, Form for Form Compositon
Address Book related data items
Favorites Button
Address Book (Including the one-touch button)
Fowarding Settings
MEAP related data items
If application supports J2ME1.1
If the application which does not support J2ME1.1 is included.
If the application uses the limited license
If the application uses the unlimited license (reusable license).
2) Register the Boot V10.99 and each firmware for upgrade device in SST (Ver.3.34 or later) beforehand.
3) Start with pressing 2 + 8 and rewrite the Boot ROM with using SST. (For upgrade device Boot V10.99)
After rewriting, becomes V4.44.
Note that once Boot ROM is rewritten, it cannot be returned to the old model.
4) After turning OFF the power, start with pressing 2 + 8.
If it does not start, E0602-0002 error will occur.
18-24
Service action at upgrade
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Ask user to reset
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Tell user that it will be deleted
Ask user to reset
Ask user to reset
Tell user that it will be deleted
Service action at upgrade
Ask user to backup with BOX backup function. If an
environment privents users from backing up, ask them to output.
Before upgrade, it cannot be backed up and it will be deleted. So
ask users to output.
Service action at upgrade
Import after export
Import after export
Import after export
Service action at upgrade
Prepare the supporting .jar file
System cannot be upgraded
Save the invalid license at uninstallation and reinstall by using it
Can be reinstalled with the same license