Canon iR7086 Series Service Manual page 642

Chapter 17
Sub item
HD-CLEAR Use it to initialize the partition selected using CHK-TYPE.
<Procedure>
1) Select the item.
2) Press the OK key.
3) Turn off and then on the main power so that initialization starts.
Do not turn off the power while initialization is under way.
DEBUG-1 Use it to set the type of log to store/timing of storage to the HDD.
settings
0 to 3 (default: 0)
- Do not use for servicing (For the analysis of the cause of trouble)
- Obey the instruction by the quality support section for usage.
DEBUG-2 Use it to print out logs stored on the HDD.
<Procedure>
1) Select the item.
2) Press the OK key.
3) See that the log is printed. (about 2 sheets of A4)
- Do not use for servicing (For the analysis of the cause of trouble)
- Obey the instruction by the quality support section for usage.
17-54
COPIER > FUNCTION > SYSTEM
Description Level
1
2
2