Removing The Front Cover Of The Duplexing Unit - Canon iR7086 Series Service Manual

Hide thumbs Also See for iR7086 Series:
Table of Contents

Advertisement

8.11.22.3 Removing the Front Cover of the Duplexing
Unit
iR7105 / iR7095 / iR7086
1) Remove the 4 screws [1] and the knob [2]; then, detach the front cover [3].
[3]
8.11.22.4 Removing the Duplex Left Feed Motor
iR7105 / iR7095 / iR7086
1) Remove the duplex feed fan unit.
2) Loosen the screw [1]; then, while pulling the tension support plate [2]
in the direction of the arrow, tighten the screw [1] (to loosen the tension
of the belt [3]).
3) Disconnect the connector [4], and remove the 2 screws [5]; then, de-
tach the duplex left feed motor [6].
[3]
[6]
[5]
8.11.22.5 Removing the Duplex Right Feed Motor
iR7105 / iR7095 / iR7086
1) Remove the front cover of the duplex unit. (4 screws, 3 knobs)
2) Loosen the screw [1]; then, while pulling the tension support plate [2]
in the direction of the arrow, tighten the screw [1] (to loosen the tension
of the belt [3]).
3) Disconnect the connector [4], and remove the 2 screws [5]; then, de-
tach the duplex right feed motor [6].
[3]
[2]
[1]
[1]
F-8-127
[1]
[4]
[2]
F-8-128
[5]
[6]
[1]
[5]
[4]
[2]
F-8-129
8.11.22.6 Removing the Reversing Flapper Solenoid
iR7105 / iR7095 / iR7086
0010-9341
1) Remove the duplexing unit from the main body.
2) Remove the two screws [1], and disconnect the connector [2]; then, de-
tach the reversing flapper solenoid [3].
0010-9346
8.11.22.7 Removing the Left Deck Feed Sensor
iR7105 / iR7095 / iR7086
1) Slide out the duplex unit assembly.
2) Remove the screw [1], and detach the sensor base [2].
3) Disconnect the connector [1], and free the claw to detach the left deck feed
sensor [2].
0010-9349
When removing the scanner sensor, be sure to remove the paint used to lock
the claw in place in advance to prevent breaking the claw. When mounting
it, be sure the claw is not displaced or the sensor is not disoriented.
8.11.22.8 Removing the Horizontal Registration Motor
iR7105 / iR7095 / iR7086
1) Remove the duplexing unit from the main body.
2) Remove the two screws [1], and detach the upper cover [2].
[1]
[1]
[2]
[3]
F-8-130
[2]
[1]
F-8-131
[2]
[1]
F-8-132
Chapter 8
0010-9355
0010-9360
0010-9361
8-47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir7105 seriesIr7095 series7095 series7086 series

Table of Contents