Canon iR7086 Series Service Manual page 575

XX= "01" to "FF"
CHK-
XX Partition
TYPE
01 FSTDEV
02 1 IMG_MNG
03 FSTCDEV
04 APL_GEN
05 TMP_GEN
2
06 TMP_FAX
07 TMP_PSS
08 3 PDLDEV
09 4 BOOTDEV
10 5 APL_MEAP
11 6 APL_SEND
12 7 APL_KEEP
13 8 APL_LOG
FF 0 not specified
YY
*1
*2
The ongoing write operation is
03
interrupted (at start-up).
*3
*4
*5
*6
05 A file system error has occurred.
*7
*8
00
01 The HDD has poor contact, or a
*9
02 system error has occurred.
04
11
*10 The HDD has poor contact.
21
13 The ongoing write operation has
*11
25
XX
compressed image data (e.g., Box)
file management table, profile
job archiving (changing)
general-purpose data
general-purpose data (temporary file)
not used
for PDL spool (temporary file)
PDL-related file
firmware (system, MEAP, key, certificate, PDF dictionary, RUI,
content, voice dictionary)
MEAP application
address book, filter
for non-initialization data storage
system log
check for and recovery of HDD full-fault sectors
Description
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then back
on the power.
- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back on
the power.
- Ask the user to download the address book data using a remote UI.
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then back
on the power.
- Start download mode, and perform full formatting using the SST and reinstall the system software; then turn
off and then back on the power.
The recovery operation for the boot partition is not possible without the use of the SST in save mode.
- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.
- Start download mode, and perform full formatting using the SST and reinstall the system software; then,
turn off and then back on the power.
- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.
- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.
- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back on
the power.
- Replace the HDD, and reinstall the system software.
The machine is designed so that execution of HD-CLEAR is not possible in service mode (so as to prevent
loss of information, e.g., address book, filter information).
- Ask the user to download the address book data using a remote UI.
- In service mode, start download mode, and execute full formatting using the SST and reinstall the system
software; then, turn off and then back on the power.
- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.
- Replace the HDD, and reinstall the system software.
The recovery operation for the boot partition is not possible without the use of the SST in save mode.
- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turn
off and back on the power.
- Replace the HDD, and reinstall the system software.
- Check the cable and the power cord.
- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turn
off and back on the power.
- Replace the HDD, and reinstall the system software.
- Check the cable and the power cord.
- Replace the HDD, and reinstall the system software.
There is a strong possibility of damage in the file data (e.g., Box) stored on the HDD.
- Set the partition number in question for CHK-TYPE, and execute HD-CHECK; then, turn off and back on
the power.
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and back on
been interrupted. the power.
(In the case of BOOTDEV, BOOTDEV2 or APL_SEND, execute reformatting using the SST, and reinstall
the system software.)
- Replace the HDD, and reinstall the system software.
T-16-4
Description
YY
Occurrence at time of Occurrence during
start-up normal execution
00,01,0
03 05 11,21
2,04
Action
*1 *5
*9 *10
*3 *8
*1 *5
*2 *6
*3 *8
*1 *5
*4 *7
Action
Chapter 16
10,12,14,
13,25
22,23,24
Action
*11 *12
16-11