The machine's DC power supply is controlled by the DC power supply PCB and the relay PCB:
PCB
DC power supply PCB
Relay PCB
10.4.2 Protection Function
10.4.2.1 Protective Functions
iR7105 / iR7095 / iR7086
The machine is designed to automatically stop the output of the DC power supply as soon as the overcurrent protective mechanism turns on.
If an overcurrent is detected by the overcurrent detection circuit A, outputs [1] and [2] are stopped; this is to prevent malfunction of the machine, as output [1] is
used by the logic system.
If the overcurrent detection circuit B detects an overcurrent, output [2] is stopped.