Canon iR7086 Series Service Manual page 144

Chapter 2
4) Remove the face plate [1].
- 2 screws [2]
5) Fit the voice guidance board [1] into the slot found at the front of the Expansion Bus-D1; then, fix it in place using the 2 screws [2] removed in step 3).
2-86
33MHz
66MHz
[1]
F-2-278
Points to Note
The Voice Guidance Kit [1] must be fitted in a specific slot. Be sure to use
slot A of the Expansion Bus-D1, avoiding slots B and C.
If slot A has been taken, relocate the existing board, and use slot A for the
Voice Guidance Board
Be sure to hold the PCB perpendicular in relation to the connector.
[1]
[C] [B] [A]
[2]
[1]
[1]