Use it to remove the system software files that have been saved in the temporary storage area of the HDD. Use it if you want to remove the files without writing

them to the HDD after downloading (menu [2] and [3]).

1) When you have downloaded the system software using menu item [2] or [3], go to step 2) without turning off and then on the power. (If you already have turned

off the power, start up the machine in safe mode.)

2) Go through the instructions on the control panel, and press an appropriate key.

[7] -> 10: execute / other than [0]: go back to Menu screen

Upon execution, the Menu screen will return.

[Stop]: Shutdown (in normal mode only)

Use it to start up the shut-down sequence.

1) Go through the instructions on the control panel, and press an appropriate key.

[Stop]->[0]: execute/ other than [0]: go to Menu screen

The shut-down sequence will be executed, and a message will appear asking you to turn off the power.

2) Turn off the main power switch, and remove the USB device.

18-38

F-18-64