Canon iR7086 Series Service Manual page 108

Chapter 2
19) Mount the card reader base to the upper front cover unit.
20) Mount the upper front cover unit lower cover to the upper front cover unit.
21) Lead the cable [1] of the card reader to the front of the upper front cover unit [2], and mount the upper front cover unit [2] to the machine.
- 3 screws [3]
22) Connect the connector [1] of the machine and the relay connector [2] of the card reader.
23) Mount the covers by going through the steps used to remove them but only in reverse:
- upper inside cover.
- connector.
- process unit cover.
- primary charging assembly front cover.
- fixing transport unit.
- front cover and the hopper cover.
24) Connect the machine's power plug, and turn on the main power switch.
2-50
F-2-192
Take care not to trap the cable by the upper front cover unit and the upper
front cover unit lower cover.
F-2-193
[1]
F-2-194
[1]
[2]
[1]
[3] [2]
[1]
[2]