4) Logout once and login again to check to see that the setting is applied properly. In case the setting is changed from 'Stop' to 'Start', login screen that was not seen

before is displayed. In case the setting is changed from 'Start' to 'Stop', access to login screen leads to the screen below and login becomes unavailable.

Setting for login by RLS Authentication

1) In order to make a setting for Login by RLS Authentication, you need to Login by Password Authentication.

2) Select 'System Management' tab > 'Utility' tab > 'Application Management Function' tab.

11-8

F-11-7

F-11-8

F-11-9

Table of Contents