Chapter 2
9) Mount the heater top plate [2] to the heater unit [3] using a screw (w/ washer) [1].
10) Fit the heater unit [1] under the top plate [2], and lead out the connector [3] through the hole [4] in the top plate.
11) Engage the 2 hooks [5] of the heater unit on the TP plate, and secure it in place with 2 screws [6].
12) Fit the connector [2] of the heater to the panel mount [1].
13) Remove the 3 screws [1], and detach the power cord base [2]. Then, mount the included power cord base using the 2 included screws [1].
2-76
F-2-253
F-2-254
F-2-255
F-2-256
You will not be using the screw [1] and the power cord base [2] you have
removed from the paper deck.