Canon iR7086 Series Service Manual page 599

MEMO:
For items other than DPOT-K, displaying value at the time of the latest potential control.
Sub item
VLT-S light area potential target value (OHT, heavy paper, tracing paper)
range: 0 to 600
VLM-S light are potential measurement value (OHT, heavy paper, tracing paper)
approx. optimum: VLT-S +/-6 V
VG-K-P primary charging grid voltage (for printer)
range: 0 to 900
VG-K-S primary charging grid voltage (OHT, heavy paper, tracing paper)
range: 0 to 900
LPOWER-S laser power level (OHT, heavy paper, tracing paper)
range: 0 to 255
BIAS-S developing bias voltage (OHT, heavy paper, tracing paper)
range: 0 to 600
<SENSOR>
Sub item
DOC-SZ indicates the size of the original detected by the original size sensor
<ALARM-2>
No.: number indicating order of alarm occurrence (the higher the number, the older the alarm)
DATE: date of alarm occurrence
TIME1: time of alarm occurrence
TIME2: time of alarm recovery
CODE: code of alarm location
DTL: detail code of alarm
CNTR: total counter reading at time of alarm occurrence
<ENVRNT>
Indicates the history of changes with reference to the monitor output of the environment sensor and the fixing thermistor (main); machine inside temperature (deg
C), humidity (%), fixing roller surface (middle portion) temperature (deg C).
The intervals at which data is collected may be changed in service mode: COPIER > OPTION > BODY > ENVP-INT.
Item
No.
DATE
TIME
COPIER > DISPLAY > DPOT
Description
T-17-8
COPIER > DISPLAY > SENSOR
Description
F-17-11
Description
number indicating data collection (the higher the number, the older the data)
date of data collection
time of data collection
Chapter 17
Level
1
1
2
2
2
2
Level
2
17-11