6.4 Parts Replacement Procedure
6.4.1 Laser Scanner Unit
6.4.1.1 Before Starting the Work
iR7105 / iR7095 / iR7086
1) Remove the manual feed pull-off roller unit.
2) Remove the developing assembly locking plate.
3) Remove the developing assembly.
4) Remove the sub hopper unit.
6.4.1.2 Removing the Laser Scanner Unit
iR7105 / iR7095 / iR7086
1) Disconnect all connectors [1], and detach the 2 anti-vibration plates [2].
- 2 screws [3]
[1]
[2]
2) Remove the laser scanner unit [1].
- 2 bosses [2]
6.4.1.3 When Replacing the Laser Scanner Unit
iR7105 / iR7095 / iR7086
There is no special work in conjunction with the replacement of the laser
scanner unit.
[3]
[2]
F-6-8
[1]
[2]
F-6-9
0011-7559
0010-8803
0010-8804
Chapter 6
6-7