Chapter 2
11) Connect the AC cable [1] to the power supply cord mount of the heater, and connect its power plug [2] to the back of the host machine.
- Check to make sure that the host machine's power plug is disconnected.
12) Fit the stop ring [3].
- Screw [4] X 1pc
2.8.4 Unpacking and Checking the Components
iR7105 / iR7095 / iR7086 / iR7095P
2-66
F-2-229
[1]
F-2-230
Be sure to advise the user not to place any object within the area [3]
indicated in the figure by shading.
Copier
(front)
[1]
[2]
[3]
[4]
Paper deck
0014-0404