Formatting The Hdd - Canon iR7086 Series Service Manual

Chapter 18

18.4.5.6 Formatting the HDD

iR7105 / iR7095 / iR7086
This function is available only when the machine is in safe mode.
[4]: Format HDD (in the presence of BOOTDEV)
Use it to format the HDD for BOOTDEV partition.
[4]: Format HDD (ALL) (in the absence of BOOTDEV, as when replacing with new HDD)
Use it to format the HDD for full partition.
<Procedure>
Go through the following to format the HDD for BOOTDEV partition:
1) If the machine is on, go through the HDD shut-down instructions, and turn off the main power.
2) Connect the USB device to the USB port.
3) Start up the machine in safe mode.
4) Follow the instructions on the control panel, and press the appropriate key.
[4] -> [0]: go to Partition Selection screen / other that [0]: go back to Menu screen
5) Go through the instructions on the control panel, and press the appropriate key.
[1] -> [0]: execute BOOTDEV formatting / other than [0]: go back to Menu screen
[C]: go back to Menu screen
6) At the end of formatting, a message will appear asking you to press a key. Press any key to go back to the Men screen.
18-36
F-18-60
F-18-61
0011-6781