Attaching The Labels, Placing Paper, And Checking Images And Operation; Others - Canon iR7086 Series Service Manual

A4
A3
iR7105/7095 Only
<Cleaning Instructions Label>
1) Fit the cleaning instructions label [1] of the appropriate language on the
upper rear cover as indicated, and attach it over the existing label. (The
English label is attached at time of shipment.)
[1]
<Lamp Warning Label>
1) Fit the Lamp Warning Label [1] of the appropriate language on the upper
rear cover as indicated, and attach it over the existing label. (The English
label is attached at time of shipment.)
[1]
<Manual Feeder Set Label>
1) Open the manual feeder assembly [1] of the ADF; then, fit the Manual
Feeder Set Label [2] as indicated, and attach it in place.
B5 A5 B5R A5R
B4 A4R
[1]
F-2-123
F-2-124
F-2-125

2.2.18 Others

iR7095P
<Shut-Down Caution Label>
1) Affix the shut down instruction label [1] in the appropriate language on
the indicated position.
2.2.19 Attaching the Labels, Placing Paper, and Checking
Images and Operation
iR7105 / iR7095 / iR7086
1) Check with the user to find out the size of paper that will be used.
2) Press the release button of the front deck (right, left), and slide out the
deck.
If you are changing the size of the front deck (right, left), refer to the
instructions under "Switching Over the Front Deck (right/left) Paper Size."
3) Attach the 3-hole paper placement label [1].
4) Put paper in the front deck (right/left).
5) Close the front deck (right/left). Affix the corresponding cassette size la-
bel [1] onto the paper size plate of the each deck.
Chapter 2
[2]
[1]
F-2-126
[1]
ON
F-2-127
[1]
F-2-128
0012-2444
0010-8971
2-31