Chapter 5
[2]
5) Remove the lower left cover.
6) Remove the upper left cover.
7) Remove the reader left cover [1].
- 2 screws [2]
[1]
8) Remove the reader front cover [1].
- 1 screw [2]
[2]
9) Disconnect the 3 connectors [1] at the rear.
[1]
10) Remove the upper rear cover [1].
- 3 cables [2]
- 3 screws [3]
5-26
[1]
F-5-70
[2]
F-5-71
[1]
F-5-72
F-5-73
[1]
11) Remove the reader rear cover [1].
- 5 screws [2]
[2]
5.4.4.3 Removing the Scanning Lamp
iR7105 / iR7095 / iR7086
1) Disconnect the connector [1], and free the cable [2] from the cable guide
[3] and the snap band [4].
2) Open the ferrite core [5] to detach. (100/230V machine)
[2]
[5]
[4]
When replacing the scanning lamp, be sure to fit the removed ferrite core to
the new lamp. (100/230V machine)
[2]
F-5-74
[1]
F-5-75
[2]
F-5-76
[1]
[3]
F-5-77
0011-7971