In the case of a system application, it will be the file name. If a general application, it is the application ID (application-ID) declared in a statement within the ap-

plication program. Within the device, the applications are set apart by means of their application IDs.

Application Version

It is the version of the application (bundle-version) declared in a statement within the application program.

Status

It indicates the status of the application in question; specifically,

Installed: the application has been installed.

Active: the application is being in use.

Resolved: the application is at rest.

Installed On

It indicates the date on which the application was installed.

Vendor

It is the name of the vendor that developed the application, and is the name (bundle-vendor) declared in a statement within the application program.

License Status

It indicates the status of the license; specifically,

None: no license is needed.

Not Installed: no license has been installed.

Installed: the appropriate license has been installed.

Invalid: the license has been invalidated.

Overlimt: the license has been used beyond its permitted limit.

License Expires After

It indicates the date after which the license expires. If the status of the license is 'none', this item will not be printed.

License Upper Limit

It indicates the limit imposed on individual counter readings. If the status of the license is 'none', this item will not be printed.

Counter Value

It is the current counter reading of a specific counter. If the status of the license is 'none', this item will not be printed.

Maximum Memory Usage

It indicates the maximum amount of memory that the application uses. It is the amount (maximum memory usage) declared in a statement within the application

program, and is expressed in kilobytes.

Registered Service

It is a list of services that have been registered by the application with the MEAP framework. Some services may not have printable data.

11.1.15 Installing an Application

iR7105 / iR7095 / iR7086 / iR7095P

Important:

- To install an application, the user needs to use the following URL when accessing the license control system to obtain a license file. In doing so, he/she needs

to register the license access number of the application and the serial number of the device.

http://www.canon.com/meap/

-Maximum 20 applications can be installed (In iR5160/iR6060/iR2250/iR2850/iR3350, one is the portal service already installed at the time of shipment from

the factory)

-The following are the resource amounts assured for each device in the operation of one MEAP application. These values are for reference purpose only, therefore

the unused resource of SMS needs to be checked at the time of installation of MEAP application.

The displayed values of SMS resource may be larger than the followings since the actual values vary according to the log-in service (authentication function)

selected by users and the configuration (future models).

iR5020/iR6020/iR2220/iR3320

iRC2620/iRC3220

iR2270/iR2870/iR3570/iR4570/iR85/iR8070/iR6570/iR5570

iRC3170/iRC2570

iRC3180/iRC2580

iR7086/iR7095/iR7095P/iR7095Printer/iR7105

iRC4080/iRC4580/iRC5180

imagePRESS C1

iRC2880/iRC3380

iR3025/iR3030/iR3035/iR3045

iR5050