Canon iR7086 Series Service Manual page 70

Chapter 2
9) Holding the grips (front, rear) on the pickup side of the machine, lift the
machine slightly, and remove the remaining pad and the plastic bag at the
same time.
10) Shift the 2 adjusters (front) [1] found at the bottom of the machine so that
they face upward, making sure that they are unlocked.
11) Take out the 2 slope plates [2] from the middle of the skid [1].
2-12
F-2-16
F-2-17
[1]
F-2-18
[1]
12) Remove the 2 pins [2] taped in place to the slope plate [1].
Turn over the slope plate [1], and match the pin hole of the skid and the
pin hole of the slope plate; then, fit a pin [2] (1 pc. each) through the holes.
Holding the grips (front, rear) on the delivery side of the machine, move
the machine off the skid by sliding it along the slope plates.
13) Remove the grip [1] fitted in step 5) while pushing the leaf spring with a
flat-blade screwdriver.
[1]
14) Remove the packing tape from the machine.
15) Open the front cover.
16) Open the compartment cover [2] found behind the front cover, and put
in the grip [3] for storage.
[2]
F-2-19
[2]
[1]
F-2-20
F-2-21