<Cassette Heater Unit-23/25>
[4]
[2]
[5]
[1]
[3]
[5]
[7]
2.8.5 Installing to the Paper Deck (Cassette Heater Unit-23/25)
iR7105 / iR7095 / iR7086 / iR7095P
[3]
[8]
[7]
Heater unit
1pc.
Relay harness unit
1pc.
Screw (w/ washer)
2pcs.
Power supply label
1pc.
Turning Off the Main Power
When turning off the main power, be sure to go through the following in
strict sequence to protect the machine's hard disk:
1) Hold down on the power switch on the control panel for 3 sec or more.
2) Operate on the touch panel according to the shut-down sequence
indicated so that the main power switch may be turned off.
3) Turn off the main power switch.
4) Disconnect the power cable (for the power outlet).
Be sure to observe the following when installing the heater to the paper
deck:
- Check to make sure that the host machine's and the paper deck have been
installed properly.
- Take care to identify the types of screws (length, diameter) and location.
[6]
F-2-231
[2]
AC input connector
[4]
AC cable
[6]
Cable protection bush
[8]
RS tight screw (M4X8)
Chapter 2
[5]
[1]
1pc.
1pcs.
1pc.
2pcs.
2-67
0014-0410