3.9.2 Removing the Scanning Lamp
1) Remove the copyboard glass.
2) Remove the right upper cover and the
right upper cover base.
3) Remove the reader left cover; then, de-
tach the reader front cover.
4) Remove the reader controller PCB (See
5.4.2.a.).
5) Move the No. 1 mirror base [1] as far as
the cut-in made in the frame.
6) Remove the three screws [2] from the
No. 1 mirror base, and detach the scan-
ning lamp [3] together with the cable
fixing plate [4].
7) Remove the four screws [1], and detach
the blanking plate [2].
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[4]
[2]
[3]
[2]
F02-309-02
[1]
F02-309-03
[1]
[3]
[2]
[1]
2-59