1100-Sheet Feeder Plug/Jack Designators - Xerox Phaser 6360 Service Manual

1100-Sheet Feeder Plug/Jack Designators

Phaser 6300/6350/6360 Service Manual
1000-Sheet Feeder Plug/Jack Designators
P/J Coordinates Remarks
Upper Tray
80 I-303 Connects the Upper OPTFDR Board and SIZE2 Harness.
81 J-303 Connects the Upper OPTFDR Board and LOWP Harness.
82 J-303 Connects the Upper OPTFDR Board and Drive Assembly.
83 J-303 Connects the Upper OPTFDR Board and OPFREC2 Harness.
84 J-303 Connects the Upper OPTFDR Board and OPF23 Harness.
85 J-303 Connects the Upper OPTFDR Board and OPFDR2 Harness.
86 J-303 Not Connected
172 G-306 Connects to Print Engine or Option Tray Module
821 H-307 Connects the Paper Size Switch and SIZE2 Harness.
822 G-307 Connects the No Paper Sensor and OPFDR2 Harness.
823 F-307 Connects the Low Paper Sensor and LOWP Harness.
824 H-308 Connects the Feed Solenoid and OPFDR2 Harness.
825 F-308 Connects the Turn Clutch and OPFDR2 Harness.
Lower Tray
80 I-312 Connects the Lower OPTFDR Board and SIZE2 Harness.
81 J-311 Connects the Lower OPTFDR Board and LOWP Harness.
82 J-312 Not Connected
83 J-312 Connects the Lower OPTFDR Board and OPF23 Harness.
84 J-311 Not Connected
85 J-312 Connects the Lower OPTFDR Board and OPFDR2 Harness.
86 J-312 Not Connected
821 H-309 Connects the Paper Size Switch and SIZE2 Harness.
822 G-308 Connects the No Paper Sensor and OPFDR2 Harness.
823 F-308 Connects the Low Paper Sensor and LOWP Harness.
824 H-309 Connects the Feed Solenoid and OPFDR2 Harness.
825 F-310 Connects the Turn Clutch and OPFDR2 Harness.
Wiring Diagrams
10-9