Servicing Electrical Components
Servicing Mechanical Components
Servicing Fuser Components
viii
Before starting any service procedure, switch off the printer power and unplug
the power cord from the wall outlet. If you must service the printer with power
applied, be aware of the potential for electrical shock.
Warning
Do not touch any electrical component unless you are instructed to do so
by a service procedure.
S7300-02
When servicing mechanical components within the printer, manually rotate
drive assemblies, rollers, and gears.
Warning
Do not try to manually rotate or manually stop the drive assemblies while
any printer motor is running.
S7300-03
Warning
This printer uses heat to fuse the toner image to media. The Fuser is
VERY HOT. Turn the printer power off and wait at least 10 minutes for the
Fuser to cool before you attempt to service the Fuser or adjacent
components.
Phaser 6300/6350/6360 Color Laser Printer Service Manual