Replace Maintenance Kit - Xerox Phaser 6360 Service Manual

Error Messages and Codes

Replace Maintenance Kit

3-52
The Printer detected an error condition that indicates the parts listed below
need to be replaced. This will ensure the rated engine life of 600,000 prints is
achievable.
Note
Two versions of the Long Life Maintenance Kit are available. The 6300/
6350 requires P/N 650-4363-00, while the 6360 uses P/N 604K48020.
See "Xerox Supplies and Accessories" on page 9-58.
Applicable Status Code:
Code 101: Replace Maintenance Kit
Troubleshooting Reference Table
Applicable Parts
Long-Life Maintenance Kit
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Follow the procedure starting on page
7-4 and replace all concerned parts.
Have all parts outlined in the
procedure been replaced?
Wiring and Plug/Jack References
Yes
Go to the Hidden
Service menu on
the Control Panel
and Reset the
Maintenance Kit
Life count.
Phaser 6300/6350/6360 Color Laser Printer Service Manual
No
Replace all
concerned parts.