Resetting Nvram; Restore Factory Registration Settings (6300/6350 Only); Restore Factory Color Settings; Restore Previous Color Settings - Xerox Phaser 6360 Service Manual
Hide thumbs
Also See for Phaser 6360:
- User manual (128 pages) ,
- Evaluator manual (17 pages) ,
- Supplementary manual (13 pages)
Table of Contents
Advertisement
Adjustments and Calibrations
Resetting NVRAM
Restore Factory Registration Settings (6300/6350 Only)
Restore Factory Color Settings
Restore Previous Color Settings
6-4
Printer configuration settings are maintained in non-volitile devices located on
the Engine Control Board, Image Processor Board, and the Configuration
Card.
Note
Some differences in NVRAM management capabilities exist between the
6300/6350 and the 6360 models. Procedures marked (6300/6350) are
only available on those models. See Menu Maps on page A-2 for the
NVRAM reset options available on each model.
To reset settings for color registration to the factory-default values:
1.
On the Control Panel, select Troubleshooting, and then press the OK
button.
2.
Select
Print Quality Problems
3.
Select
Color
Registration, and then press the OK button.
4.
Select
Restore Factory
the color settings to factory defaults.
To reset settings for density and color balance to the factory-default values:
1.
On the Control Panel, select Troubleshooting, and then press the OK
button.
2.
Select
Print Quality Problems
3.
Select
Calibrate Colors
4.
Select
Restore Factory
5.
Select
Restore Factory Settings
reset the color settings to factory defaults.
To restore the color settings to the ones that existed before you saved the last
color balance adjustments.
1.
On the Control Panel, select Troubleshooting, and then press the OK
button.
2.
Select
Print Quality Problems
3.
Select
Calibrate Colors
4.
Select
Restore Previous
5.
Select
Restore Previous Settings
to reset the color settings to the previously set values.
menu, and then press the OK button.
Settings, and then press the OK button to reset
menu, and then press the OK button.
menu, and then press the OK button.
Settings, and then press the OK button.
NOW, and then press the OK button to
menu, and then press the OK button.
menu, and then press the OK button.
Settings, and then press the OK button.
NOW, and then press the OK button
Phaser 6300/6350/6360 Color Laser Printer Service Manual
- Quick Links:
- Replace Transfer Roller
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
