Xerographics - Xerox Phaser 6360 Service Manual

Xerographics

Phaser 6300/6350/6360 Color Laser Printer Service Manual
■
Feed Solenoid
Controls the operation (rotation/stop) of the Feed Roller Assembly by
controlling the rotations of the Gear Feed.
■
Low Paper Sensor
The actuator lowers as print media is used in the tray. When the actuator
lowers to a pre-determined position, it blocks the sensor beam to trigger a
low paper status. The actuator position can be seen from the front of the
paper tray allowing confirmation of the print media quantity.
■
Turn Roller
The Turn Roller receives drive energy from the Main Drive Motor through
the Turn Clutch and transports the print media out of the paper tray to the
Registration Roller.
Note
The Laser Unit used in the 6360 model is different than the Laser Unit
used in 6300/6350 models. Use care when selecting the replacement
part.
Developer Frame Assembly
Imaging Unit
Waste Toner Reservoir
■
Developer Assemblies
The Developer Assemblies receive toner from the Toner Cartridge and
through electrostatic attraction, transfer toner to the latent image on each
of the four color drums.
Theory of Operation
Laser Unit
Developer Assemblies
s6360-062
2-41