Printer Plug/Jack Designations; Phaser 3320 Plug/Jack Designators - Xerox Phaser 3320 Service Manual

Wiring

Printer Plug/Jack Designations

This chapter contains the plug/jack designators, locator diagrams, and wiring diagrams. The Plug/Jack
Locator diagrams show the P/J locations within the printer. Use these illustrations to locate
connections called out in the troubleshooting procedures.
1. Locate the P/J connector designator in the first column of the table.
2. With this information, go to the map listed in the Map column.
3. Use the coordinates to locate the connection indicated on the map by its P/J designation number.
4. The Remarks column provides a brief description of each connection.

Phaser 3320 Plug/Jack Designators

Phaser 3320 Plug and Jack Designators
P/J Map Coordinates Remarks
CN1 4 A-106
CON1 4 H-113
CN1 3 I-102
CN1 3 C-102
CN1 1 I-103
CN1 2 G-107
CN2 1 H-103
CN2 1 B-105
CN2 3 K-102
CON2 4 H-111
CON3 4 A-113
CN3 1 G-104
CN4 1 H-104
CON4 4 A-112
CN5 1 I-102
CN6 1 J-103
CN6 1 B-112
CN7 1 G-107
CN8 1 I-104
CN10 1 G-107
CN11 1 I-105
CN12 1 G-106
CN13 1 F-108
CN14 1 I-106
CN15 1 F-109
CN18 1 I-108
7-2 Phaser 3320 and WorkCentre 3315/3325
Service Manual
HVPS to Main Board
LVPS to AC Inlet
Laser Unit to Main Board
Main Motor to Control Panel
Main Board to Control Panel
Optional Tray Feeder Board to interim connector P/J6 to Main Board
Main Board to Wireless Board
Control Panel Board to Main Board
Laser Unit to Main Board
LVPS to Fuser
LVPS to Main Board
Main Board to HVPS
Main Board to Feed, Registration, and Paper Empty Sensors
LVPS to Main Board
Main Board to CRUM
Main Board to P/J30 to Fuser
Interim Connector Main Board to Feeder Board
Main Board to Laser
Main Board to Exit/Bin Full Sensor and Cover Interlock Switch
Main Board to Bypass Tray Clutch and Bypass Tray Paper Empty Sensor
Main Board to ENET Port
Main Board to Main Fan
Main Board to LVPS
Main Board to USB Port
Main Board to LVPS
Main Board to Thermostat
Xerox Internal Use Only