Error Messages and Codes
Wrong Paper Size or Paper Not Availabe; Load Tray [3][4][5] with [size][type]
3-64
Tray [3] [4] [5] paper size mismatch error.
Applicable Status Codes:
Code 178:
Wrong Paper Size; Load Tray 3 with [size] [type]
Code 179:
Wrong Paper Size; Load Tray 4 with [size] [type]
Code 180:
Wrong Paper Size; Load Tray 5 with [size] [type]
Code 188:
Paper Not Available; Load Tray 3 with [size] [type]
Code 189:
Paper Not Available; Load Tray 4 with [size] [type]
Code 190:
Paper Not Available; Load Tray 5 with [size] [type]
Initial Actions:
■
Inspect the tray to ensure that it is free of obstructions, is loaded with
supported media, and the guides are adjusted correctly.
■
Cycle printer power.
■
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
For 550-Sheet Feeder:
Paper Size Switch, PL11.2.6
■
Paper Tray, PL11.4.1
■
SIZE Harness, PL11.2.8
■
For 1100-Sheet Feeder:
Paper Size Switch, PL12.2.6
■
Paper Tray, PL12.6.1
■
SIZE2 Harness, PL12.3.5
■
Troubleshooting Procedure Table
Step Actions and Questions
1
Check the affected tray for damaged
parts:
Paper Size Switch, PL11.2.6, PL12.2.6
■
Paper Tray, PL11.4.1, PL12.6.1
■
Are any parts damaged?
Test the affected Paper Size Switch.
2
Run the Service Diagnostics Paper Size
Switch test. Use the table on (page 2-7).
Do the switches function correctly?
Wiring and Plug/Jack References
Paper Size Switch Signal Definitions table
■
(page 2-7)
550-Sheet Feeder P/J Locator (page 10-12)
■
550-Sheet Feeder Tray Wiring (page 10-35)
■
1100-Sheet Feeder P/J Locator (page 10-10)
■
1100-Sheet Feeder Tray Wiring (page 10-31)
■
Yes
Replace
damaged parts.
Replace the
Engine Control
Board
(page 8-106).
Phaser 6300/6350/6360 Color Laser Printer Service Manual
No
Go to Step 2.
Go to Step 3.