Fastener Types - Xerox Phaser 6360 Service Manual

Service Parts Disassembly

Fastener Types

8-6
The following table lists the primary types of Posi-Drive screws used to
assemble the printer. The procedures provide dimensional specifications for
screws being removed.
Posi-Drive Screw Types used in the Printer
Type Application
Self-
tapping,
plastic
Parts etc Plastic
Self-
tapping,
plastic
Parts etc Plastic
Self-
tapping,
plastic with
flange
Parts etc Plastic
Sheet Metal,
silver
Parts etc Sheet metal
Sheet Metal.
with flange
Parts etc Sheet metal
Sheet Metal,
silver with
lock washer
Parts etc Sheet metal
Caution
Use care when installing self-tapping screws in plastic. To properly start
the screw in plastic, turn the screw counter-clockwise in the hole until you
feel the screw engage the threads, then tighten as usual. Failure to
properly align or over tighten the screw can result in damage to previously
tapped threads.
Shape
Coarse
Coarse
Coarse
Phaser 6300/6350/6360 Color Laser Printer Service Manual
Characteristics
1. Silver colored
2. Screw thread is coarse
compared to metal screw.
3. Screw tip is thin.
1. Black colored
2. Screw thread is coarse
compared to metal screw.
3. Screw tip is thin.
1. Silver colored
2. It has a flange.
3. Screw thread is coarse
compared to metal screw.
4. Screw tip is thin
1. Silver colored
2. Diameter is uniform
3. Typically 6 mm in length
1. Silver colored
2. It has a flange.
3. Diameter is uniform
1. Silver colored
2. Includes a toothed washer
3. Diameter is uniform
4. Used for grounding
terminals.