Plug/Jack Locator Diagrams; Print Options Plug/Jack Designators - Xerox Paser 7400 Service Manual

Plug/Jack Locator Diagrams

The P/J Locator diagrams show the location of primary connections within the option
devices. Use these illustrations to locate connections called out in the troubleshooting
procedures presented in Section 3.
To find the location of a Plug or Jack:
1.
Locate the P/J connector designator in the first column of the table.
2.
With this information, go to the map listed in the second column.
3. Use the coordinates to quickly locate the connection indicated on the map with
its P/J designation number.

Print Options Plug/Jack Designators

Finisher/Plug/Jack Designators
P/J Map Coord
CN1 1 A-835
CN2 1 A-837
CN3 1 I-834
CN4 1 K-836
CN5 1 K-838
CN6 1 D-834
CN7 1 K-835
CN8 1 B-834
CN9 1 H-841
CN10 1 F-834
CN11 1 J-841
CN12 1 A-838
CN13 1 J-834
CN14 1 A-836
CN15 1 K-838
CN16 1 A-840
7-2
Remarks
Receives 24-volt from the printer.
Monitors transmit and receive voltage levels from the printer.
Connects to the front and rear alignment motor signals.
Connects to front door (Door J), upper cover (Door H) , and home
position sensors.
Connects to rear home position, tray paper, delivery belt position,
and processing tray sensors.
Connects to the Lift Motor and the staple/fold motor.
Supplies required voltages for the Stapler unit.
Connects to the Stapler Safety, Front Door (Door J), and Joint
switches.
Connects to swing guide home position, staple fold clock, and
paddle home position sensors.
Connects to the paddle motor and feed motor signals.
Receives detect signals from the Stapler unit.
Supplies required signals for 1/2 of the punch unit (optional).
Connects to the delivery motor signals.
Supplies required signals for 1/2 of the punch unit (optional).
Connects to shift limit, Lift Motor clock, and bind tray sensors.
Connects to Inlet, stack feed roller, folding home position, and
folding position sensors.
Phaser 7400 Color Printer Options Service Manual