Print Engine Board Plug/Jack Designators - Xerox Phaser 6115MFP Service Manual

Print Engine Board Plug/Jack Designators

Map P/J Coordinates
1 P/J1 J-137
1 P/J2 B-137
1 P/J3 B-135
1 P/J4 C-141
1 P/J5 G-135
1 P/J6 H-134
1 P/J7 I-134
1 P/J8 D-135
1 P/J9 F-134
1 P/J10 C-135
1 P/J11 C-141
1 P/J12 D-141
1 P/J13 E-141
1 P/J14 F-141
1 P/J15 D-138
1 P/J16 C-138
1 P/J17 G-141
1 P/J18 H-141
1 P/J19 B-139
1 P/J20 C-140
1 P/J21 I-139
1 P/J22 C-141
1 P/J23 C-140
2 P/J1 B-139
2 P/J2 A-140
2 P/J3 D-141
2 P/J4 E-136
2 P/J6 I-135
2 P/J7 J-135
2 P/J8 H-134
Phaser 6115MFP Multifunction Product Service Manual
Print Engine Plug/Jack Designators
Remarks
Connects the Engine Control Board to CN1 of the Image Processor Board.
Connects the Engine Control Board to CN4 of the DC Power Supply 1.
Connects the Engine Control Board to CN6 of the DC Power Supply 1.
Connects the Engine Control Board to the Power Supply Cooling Fan.
Connects the Engine Control Board to the Rack Positioning sensor, and the Rack and
Developing motors.
Connects the Engine Control Board to the Exit Sensor.
Connects the Engine Control Board to the Thermistor.
Connects the Engine Control Board to the Main Motor.
Connects the Engine Control Board through CN1 to the IDC, Belt Positioning, and cleaning
Blade Sensors.
Connects the Engine Control Board to the Fusing and Ventilation Motors, and the cleaning
blade solenoid.
Connects the Engine Control Board to the Registration Solenoid and the 2nd Image Transfer
Solenoid.
Connects the Engine Control Board to the Registration and Transparency Sensors.
Connects the Engine Control Board through to the Fusing Paper Loop and 2nd Image Transfer
Sensors.
Connects the Engine Control Board through CN1 to the Waste Toner Detect Board and the DC
Power Supply 1.
Connects the Engine Control Board to the Temperature/Humidity Sensor.
Connects the Engine Control Board to the Tray 1 Paper Empty Sensor.
Not connected.
Connects the Engine Control Board to the High Voltage Power Supply.
Connects the Engine Control Board to the Laser Unit through connector P/J1 on the Laser.
Connects the Engine Control Board directly to the Laser Unit.
Connects the Engine Control Board to the Duplex Control Board.
Connects the Engine Control to the 500-Sheet Feeder Control Board.
Not connected.
Connects the Image Processor Board to the speaker.
Connects the Image Processor Board to DC Power Supply 1.
Connects the Image Processor Board to the Laser Unit.
Connects the Image Processor Board to the NCU Board.
Connects the Image Processor Board to the Scanner Board.
Connects the Image Processor Board to the Control Panel Board.
Connects the Image Processor Board to the Scanner Motor through Connector CN10.
Wiring Diagrams
10-3