Xerox Phaser 6360 Service Manual page 496

Wiring Diagrams
10-4
Print Engine Plug/Jack Designators (Continued)
P/J Map Coordinates
220 1 C-106
CN1 4 B-153
311 3 G-142
341 1 E-105
342 1 E-105
361 2 F-122
471 4 H-154
472 4 G-153
473 4 F-153
474 4 G-153
481 2 G-123
482 1 E-107
484 2 E-119
491 2 H-123
501 1 C-107
511 1 H-106
512 1 I-106
513 1 I-106
514 1 J-106
521 2 F-123
701 1 G-106
702 1 H-106
703 1 H-106
704 1 I-105
710 2 D-119
910 3 H-136
920 3 I-137
3411 1 F-106
Remarks
Connects the Control Panel and Control Panel Harness.
Connects the Temperature/Humidity Sensor and TMP
Harness.
Connects the Engine Control Board and LV RPG Harness.
Connects the CRUM Antenna and RFID2 Harness.
Connects the CRUM Antenna and TNR Harness.
Connects the Fuser and FSR/ADC Harness.
Connects the Paper Size Switch and FDR Harness.
Connects the No Paper Sensor and FDR Harness.
Connects the Low Paper Sensor and FDR Harness.
Connects the Feed Solenoid and FDR Harness.
Connects the Main Motor and FAN/PHD/MOT Harness.
Connects the Fuser Fan and FAN/PHD/MOT Harness.
Connects the PHD2 Harness and FAN/PHD/MOT Harness.
Connects the Developer Motor and FAN/PHD/MOT
Harness.
Connects the Duplex Motor and FRONT/DUP Harness.
Connects the Toner Motor (Y) and TNR Harness.
Connects the Toner Motor (M) and TNR Harness.
Connects the Toner Motor (C) and TNR Harness.
Connects the Toner Motor (K) and TNR Harness.
Connects the Fuser Motor and TNRFULL/FSR Harness.
Connects the No Toner Sensor (Y) and TNR Harness.
Connects the No Toner Sensor (M) and TNR Harness.
Connects the No Toner Sensor (C) and TNR Harness.
Connects the No Toner Sensor (K) and TNR Harness.
Connects the CRUM and PHD2 Harness.
Serial Debug Port
Mode Select Port
Connects the RFID2 Harness and RFID Harness.
Phaser 6300/6350/6360 Service Manual