Service Parts Disassembly
8-46
12.
Lower Door B to a supporting surface.
13.
Remove the Gear MPT and attached spring from the shaft. Leave the
spring attached to the printer.
14.
Remove the screw that secures the Tray 1 (MPT) Feed Solenoid and the
ground wire to the Chute Assembly Out.
15.
Remove the Tray 1 (MPT) Feed Solenoid.
Replacement Note
After servicing the Feed Solenoid, replace the cable tie and verify
routing of the harness bundle. Make certain that repeated door
operation does not abrade the harness bundle.
Phaser 6300/6350/6360 Color Laser Printer Service Manual
s6360-172