Plug/Jack Diagrams And Designators; Print Engine Plug/Jack Designators - Xerox Phaser 3250 Service Manual

Plug/Jack and Wiring Diagrams

Plug/Jack Diagrams and Designators

Print Engine Plug/Jack Designators

10-2
This chapter contains the Plug/Jack Designators, Locators, and wiring
diagrams for the print engine and all options.
The Plug/Jack Locator diagrams show the P/J locations within the printer. Use
these illustrations to locate the P/J connectors called out in the
Troubleshooting procedures presented in Sections 3, 4, and 5.
The Plug/Jack locators consist of the P/J Designator Tables and the P/J
Locator Diagrams.
The P/J column lists the Plug/Jack numbers in numerical order.
The Map column provides the map number of the specific areas (i.e.,
Electrical, Laser Unit...etc.)
The Coordinates column lists the diagram coordinates for the location of
the connector.
The Remarks column provides a brief description of each connection.
1. Locate the P/J connector designator in the first column of the table.
2. With this information, go to the map listed in the second column.
3. Use the coordinates to locate the connection indicated on the map with its
P/J designation number.
Print Engine Plug/Jack Designators
P/J Map Coordinates
CN1 1, 5
CN1 2, 5
CN2 1
CN2 1
CN2 1
CN3 1
CN3 1
CN4 1
CN6 1
CN6 1
CN8 1, 5
Remarks
Connects the Main Controller Board and the Laser
Unit.
Connects the HVPS and the Main Controller Board.
Connects the Main Controller Board and the Main
Motor.
Connects the Main Controller Board and the
Registration Clutch.
Connects the Main Controller Board and the Pick-Up
Solenoid.
Connects the Main Controller Board and the DC Fan
(LSU Fan).
Connects the Main Controller Board and the
Interlock Switch.
Connects the Main Controller Board and the HVPS.
Connects the the Main Controller Board and the
Thermistor (part of the Fuser).
Connects the Main Controller Board and the Exit
Sensor.
Connects the Main Controller Board and the
Developer Unit CRUM.
Phaser 3250 Laser Printer Service Manual