Adding A New Lamp; Advanced: Lamp History Menu - Christie CP2000-SB User Manual

Section 1: Introduction

Adding a New Lamp

Select new lamp
type from drop
down list.
Enter serial
number for new
lamp installed.
Description of why
lamp change is
required.
Read-only window
that displays the
information of
recorded lamps.
Table 3.11 New Lamp Fields
NEW LAMP FIELDS
Lamp Type
Serial #
Change Reason
Save
Hours

Advanced: Lamp History Menu

A list of the last 10 recorded lamp serial numbers appears here, along with their dates of entry and number of
hours logged. This is a read-only menu unless activated via the New Lamp button on the Advanced: Lamp
menu, which adds edit boxes and a Save button for recording in memory the serial number of a new lamp and
the number of hours it has already been in use (if applicable).
3-30
Figure 3-18 New Lamp Fields
Select lamp type using the drop down list.
Touch to activate keyboard for editing.
Select description that best explains why lamp was changed.
Touch to record the new serial number and date, and automatically reset the lamp
timer to the same value entered in Hours text box.
Enter the number of hours logged on the newly installed lamp. If the lamp has
never been used the value should be 0.
Figure 3-19 Advanced: Lamp History Menu Options
SAVE required.
• Serial # will be
added to top of
list
• Lamp timer will
reset to 0 hours.
Enter the number
of hours logged
on the newly
installed lamp.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)