Warnings And Guidelines; Labels And Markings; General Precautions - Christie CP2000-SB User Manual

Hide thumbs Also See for CP2000-SB:
Table of Contents

Advertisement

Section 1: Introduction
6.1

Warnings and Guidelines

This projector is designed for safe and reliable operation. However safe operation is not assured by design
alone; installers, service technicians, trained operators and all other users must maintain a safe environment at
all times. Please read through and understand all warnings and precautions before attempting to operate the
projector.

6.1.1 Labels and Markings

Observe and follow any warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle indicates related operating/maintenance
instructions in the documentation accompanying the projector.
The lightning flash and arrowhead symbol within the equilateral triangle indicates non-insulated
dangerous voltage within the projector's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.

6.1.2 General Precautions

Be aware of the following general precautions in all CP2000-SB installations:
extremely high brightness can cause permanent eye damage. 2) For protection from
ultraviolet radiation, keep all projector housings intact during operation. Protective
clothing and safety goggles are recommended.
NOTES: 1) The American Conference of Governmental Industrial Hygienists (ACGIH) recommends
occupational UV exposure for an 8-hour day to be less than 0.1 microwatts per square centimeters of effective
UV radiation. An evaluation of your workplace is advised to assure employees are not exposed to cumulative
radiation levels exceeding the government guidelines for your area. 2) Be aware that some medications are
known to increase one's sensitivity to UV radiation.
away from the concentrated light beam of the lamp. 2) Position all cables where
they cannot contact hot surfaces or be pulled or tripped over.
This projector must be installed on the floor only, and operated in an environment which meets the operating
range specifications in
qualified service technician.
6-2
1) Never look directly into the projector lens or at the lamp. The
1) FIRE HAZARD. Keep hands, clothes, and all combustible material
Section 8
Specifications. Warning! Opening or removing a projector cover requires a
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents