Lamps - Christie CP2000-SB User Manual

CP2000-SB Pedestal (3-Phase Plus Single-Phase)
Nominal voltage
Absolute operating voltage range
Line frequency
Inrush current (max.) NOTE: does not include lamp
Current consumption per phase (max.) @ 6.0 kW
Power consumption (max.)
Current rating (continuous) of 3-phase AC input at breaker
Ballast
Start-up voltage
Operating voltage range
Operating current range
Max. ripple
Internal "Convenience AC" **
Qty. & type of AC connector/receptacle
Maximum wire gauge for terminal blk.
Nominal voltage(dependent on voltage connected to unit)
No. of phases, any region
Line frequency, any region
Power available (max.)
Current available, any region
8.6

Lamps

CXL/CDXL Lamps (kW)
CXL*/CDXL-20 (2.0)
CXL/CDXL-30 (3.0)
CXL/CDXL-45 (4.5)
CXL/CDXL-60 (6.0)
CDXL-60SD (6.0)
* CXL-20 requires adaptor kit (P/N 003-001728-xx) NOTE: Current range shown includes over-drive, which
is 10% more than the original lamp rating.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Current Range Average life
(amps) (Hours)
60-85 3500
90-120 2500
95-155 900
105-165 1000
105-170 700
208 VAC (N. America / Japan)
400 VAC (Europe / Asia)
180-235 VAC (N. America / Japan)
342-456 VAC (Europe / Asia)
50 Hz - 60 Hz nominal
38 A (N. America / Japan)
26 A (Europe / Asia)
28 A @ 208 VAC (N. America / Japan)
16 A @ 400 VAC (Europe / Asia)
8.8 kW, all regions
40 A (N. America / Japan)
40 A (Europe / Asia)
135 - 175 VDC
18 - 46 VDC
50 - 180 A
1% max @ 25°C
1 terminal block (N. America / Japan)
1 terminal block (Europe / Asia)
8 AWG
100 / 120 (N. America / Japan)
208 / 240 (Europe / Asia)
1
50 Hz - 60 Hz nominal
1320 W (N. America / Japan)
1500 W (Europe / Asia)
10 A
Section 1: Introduction
8-5