Christie CP2000-SB User Manual page 178

Function Code / Examples
Focus (FCS) requires v2.9 or higher
(FCS 860)
(FCS 860 1)
(FCS! 860 1 1)
For Your Information (FYI)
(FYI)
Gamma (GAM)
(GAM!"gamma2.6")
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Description and Parameters
Used to adjust the focus under motor control.
Write
P1 = Location
P2 = Approach direction
NOTE: Approach is optional.
(-1 = Positive to Negative Approach,
1 = Negative to Position Approach)
Read
P1 = Real-time position
P2 = Current direction
P3 = Moving Status (0 = not moving, 1 = moving)
Related commands are Intelligent Lens System (ILS), Lens
Horizontal Offset (LHO), Lens Vertical Offset (LVO), and Zoom
(ZOM)
A change in projector status generally broadcast from TPC/proj. to
all clients. See Messages With Multiple Parameters in this
Appendix.
The "filename" representing the current gamma. For example,
"gamma2.6" is typically used in theatres. Gamma files (name and
content) are all currently pre-defined. Also known as "look-up
tables".
Section 1: Introduction
B-5