Admin: Ip Config Menu - Christie CP2000-SB User Manual

Section 1: Introduction

Admin: IP Config Menu

Use the IP Config menu when you need to define or change the Ethernet settings-i.e., network address-of the
projector and/or its TPC or if you want to configure SNMP (remote monitoring). NOTE: Record any new
settings on Section 1.4 Who Should Use This Manual
DLP or TPC Configuration
Choose which
address to see or
change.
Projector name -
Not applicable
for TPC.
Auto-assign.
NOTE: Requires a
DHCP server.
Enter valid and
unique address
for this device and
site. (Defaults
shown. NOTE:
Gateway is cur-
rently
non-functional).
SNMP Configuration
Access SNMP con-
figuration options.
Choose which
MIB structure to
retrieve Trap
Object ID from
(default=11273).
Enter specific
address to send
trap information.
3-44
Figure 3-32 Choosing DLP (or TCP) from
Admin: IP Config Menu
Figure 3-33 Choosing SNMP from
Admin: IP Config Menu
of this manual.
Implement
current settings.
Enables/disables
text entry below.
Enables/disables
text entry below.
Implement
current settings.
Enables/disables
SNMP
configuration.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)