3.3
Power-down Procedure
1. At the TPC, press the lamp button (on Main menu) to turn the lamp OFF. You must hold the button down
briefly.
2. Wait at least 10 minutes so that fans continue to cool the lamp. Warning! Be sure to wait for the cooling
fans!
3. At the operator's side of the pedestal, set all breakers to OFF. NOTE: Manual shut-down only. Optional
automation not yet available from Christie.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Figure 3-3 Power-down Procedure
Section 1: Introduction
3-7