Operation - Christie CP2000-SB User Manual

3
This section describes how to use the controls and switches for basic operation of the projector once it
is properly installed by a qualified service technician. NOTE: The illustrations provided are to
enhance the understanding of the written material and may not represent your exact projector model.
• 3.1 Projector Basics
• 3.2 Power-up Procedure
• 3.3 Power-down Procedure
• 3.4 Introduction to the Touch Panel Controller
• 3.5 Using the Touch Panel Controller (TPC)
• 3.6 Remote Control of the Touch Panel Controller
• 3.7 Upgrading SSM Firmware
• 3.8 Working with the Lamp
• 3.9 Working with the Lens
• 3.10 Working with 3D
• 3.11 Working with Servers and Diagnostics
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)

Operation

3-1