Diagnostic Tools; Viewing Boxer 4K Information; Viewing Lamp Information; Adding Lamp End-Of-Life Indicator - Christie Boxer 4K Series User Manual

Diagnostic tools

Follow these procedures to help with diagnosing issues with Boxer 4K.

Viewing Boxer 4K information

View the licenses for the software added to Boxer 4K and the licenses of the software used to operate
Boxer 4K. The information is read-only.
1. To view the additional software added to Boxer 4K, next to MENU > Admin and next to
Licenses, select View.
2. To view the software licenses used to run Boxer 4K, select MENU > Admin and next to About,
select View.

Viewing lamp information

Monitor the states of the lamps and the number of hours used.
1. Select MENU > Status > Lamp Info.
2. Use the right arrow to select the lamp list.
3. For a detailed view of a specific lamp, select Enter.

Adding lamp end-of-life indicator

Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.
1. Select MENU > Configuration > Lamp > Lamp Life Warning at (Hours).
2. Select Enter.
3. Use the right and left arrows to specify the number of hours remaining before issuing a lamp
end-of-life warning.
4. To save the adjustment, select Enter.

Freezing an image

Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image.
For example, in moving images sometimes it is difficult to observe artifacts such as external de-
interlacing/resizing and signal noise.
1. Select MENU > Admin > Diagnostics.
2. To enable freezing of an image, select Freeze Image and select Enter.
3. To return to normal operation, select Enter again to clear the checkbox.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
55