Other Methods; Adjusting The Cinema Display - Christie CP2000-SB User Manual

Section 1: Introduction

4.3.2 Other Methods

Depending on your installation, you may be able to use ASCII commands (via Ethernet communication link) to
select a source from a different controller in a remote location. Refer to
Touch Panel Controller
Regardless of how the display file is selected, the feature will appear on screen according to the numerous
specific display settings defined for it. If the display does not appear as expected on screen, part of the display
setup is probably not configured correctly for the incoming source. Try a different button on the Main menu. If
the image is still incorrect, this source may have to be re-configured.
4.4

Adjusting the Cinema Display

For general users, only the selection of a digital cinema feature is accessible. The precise processing which
affects details of image quality is predefined in its display files such as Source and Screen-these settings are
password-protected and accessible by trained operators or installers only.
If you feel the cinema display is incorrect or faulty, contact the trained operator in your theatre who can correct
or further customize specific display file settings.
4-8
and Appendix B: ASCII
Section 3.6 Remote Control of the
Messages.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)