Diagnostic Tools
Follow these procedures to help with diagnosing issues with the projector.
Viewing lamp information
1. Select MENU > Status > Lamp Info.
2. Use the right arrow to select the lamp list.
3. For a detailed view of a specific lamp, select Enter.
Adding lamp end-of-life indicator
Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.
1. Select MENU > Configuration > Lamp > Lamp life warning at (hours).
2. Select Enter.
3. Use the right and left arrows to specify the number of hours remaining before issuing a lamp
end-of-life warning.
4. To save the adjustment, select Enter.
Freezing an image
Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image. For
example, in moving images sometimes it is difficult to observe artifacts such as external de-
interlacing/resizing and signal noise.
1. Select MENU > System Settings > Diagnostics.
2. To enable freezing of an image, select Freeze Image and select Enter.
3. To return to normal operation, select Enter again to clear the checkbox.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
28