Tpc About Menu; Understanding Versions In Your Projector - Christie CP2000-SB User Manual

3.5.7 TPC About Menu

The About menu lists which versions of critical components are installed in the projector. As shown in Figure
3-38, this is a read-only menu for all users, and includes a STOP button for installers/service to exit TPC
software entirely and return to Windows™.

3.5.8 Understanding Versions in Your Projector

Consult the About menu to determine the current level of a hardware or software component installed in your
projector. Upgrading any of these components requires a Christie service technician.
TOUCH PANEL - Determines the software functionality of the Touch Panel Controller (TPC), its menu
language, and its operating system.
SSM - Indicates which System Supervisor Module is installed (H/W) and what SSM software is present (Main
and Boot portions).
ENGINE - Indicates the main processing software of the projector. This is a summary of the Interface,
Processor and Formatter Interface entries that appear below it in the About menu-i.e., any change to one of
these elements would automatically denote a new Engine version. NOTE: The remaining individual red, green
and blue formatters are independent of Engine version.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)
Figure 3-38 About Menu
Section 1: Introduction
Exit TPC software and
return to Windows™
(available to installer
only)
List of all software
versions in the
projector
(Read-only)
3-49