Diagnostic tools
Follow these procedures to help with diagnosing issues with Mirage 304K.
Viewing Mirage 304K information
View the licenses for the software added to Mirage 304K and the licenses of the software used to
operate Mirage 304K. The information is read-only.
1. To view the additional software added to Mirage 304K, select MENU > Admin > Licenses.
2. To view the software licenses used to run Mirage 304K, select MENU > Admin > About.
Viewing lamp information
Monitor the states of the lamps and the number of hours used.
1. Select MENU > Status > Lamp Info.
2. Use the right arrow to select the lamp list.
3. For a detailed view of a specific lamp, select Enter.
Adding lamp end-of-life indicator
Specify the number of hours remaining before issuing an end-of-life indicator for the lamp.
1. Select MENU > Configuration > Lamp > Lamp Life Warning at (Hours).
2. Select Enter.
3. Use the right and left arrows to specify the number of hours remaining before issuing a lamp
end-of-life warning.
4. To save the adjustment, select Enter.
Freezing an image
Use the Freeze Image diagnostic tool to examine in detail a still version of an incoming image.
For example, in moving images sometimes it is difficult to observe artifacts such as external de-
interlacing/resizing and signal noise.
1. Select MENU > Admin > Diagnostics.
2. To enable freezing of an image, select Freeze Image and select Enter.
3. To return to normal operation, select Enter again to clear the checkbox.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
55