Using The Touch Panel Controller (Tpc) - Christie CP2000-SB User Manual

Section 1: Introduction
3.5

Using the Touch Panel Controller (TPC)

Touch Panel Controller software resembles other Windows™-based applications, but is activated by touching
the TPC screen itself.
Touch large raised rectangular buttons to activate a function such as turning the lamp or shutter ON or OFF, or
to start a presentation, or select a different icon. Buttons may include text and/or an icon.
• To log ON/OFF as a different user, touch the user icon in the bottom right corner.
• To go to a new menu, touch its tab at the top of the page.
• To go to a submenu, touch its tab located above the status bar.
• To see more options in pull-down menus, touch
• To select an option in a list, touch the option text.
• To begin entering text such as serial numbers, touch the entry box.
• To escape without change from a pull-down list, touch menu background.
• Leaving a menu automatically saves its current settings.
• Touch checkboxes to toggle on or off.
• Touch
All TPC menus and functions are illustrated and explained below.
NOTES: 1) Shown are SAMPLE menus only-your specific text and/or icons may vary according to settings
recorded in the password-protected menus. By default, the Main menu offers 32 pre-configured channels. 2) If
necessary, adjust TPC screen brightness and contrast via the Windows CE Display Settings for this device
(service password required). If your TPC is enclosed in a blue casing, use the small knob on the back of the
unit to adjust screen settings.
3-10
to jump to the Status menu at any time.
.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)