Replacing A Lens - Christie CP2000-SB User Manual

Section 1: Introduction
6.5

Replacing a Lens

A variety of primary lenses can accommodate different throw distances and specific types of installations-see
Section 8 Specifications. To replace or change a lens:
1. Release the lens locking lever (UP position).
2. Pull out lens and replace with a different primary lens as described in
3. Secure with lens locking lever (down position).
4. Calibrate the lens. See
6-12
Figure 6-3 Replacing the Air Filter
Section 2.7 Basic Image Alignment
Section 2.1.4
for details.
Lens(es).
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)