Stand-By Mode; How Old Is My Lamp - Christie CP2000-SB User Manual

Section 1: Introduction

3.8.5 Stand-by Mode

Close the douser (shutter) to put the projector in a
cooler stand-by mode where lamp power is
reduced to 50% of its maximum rating. Upon
opening the douser and restoring the image, the
lamp power will return to its previous setting.

3.8.6 How Old is My Lamp?

When a new lamp is installed and its serial number
recorded (Advanced: Lamp menu), the lamp
timer resets to 0 and begins logging time for the new lamp. This total appears in both the Advanced: Lamp
menu and the Status menu. See right.
The Status menu also shows Total Lamp Hours, which is the accumulated time logged for all lamps installed
thus far. Each past lamp log also appears in the Advanced: Lamp History menu.
3-62
Figure 3-51 Lamp Power in Stand-by Mode
Figure 3-52 Lamp Hours
50% lamp
power when
closed.
CP2000-SB User Manual
020-100162-06 Rev. 1 (03-2014)